Dimmer Module 0-10V Analogue Single Channel

The LCDM-MOD-0/10 LED Dimmer module is designed to snap into most stand NZ switch plates, HPM, PDL & Clipseal. Excellent unit for matching into existing decor. The spline for the knob is a standard 6mm x T18 which allows the end user to use readily available knobs to suit their decor. This unit is not made to take a load but instead output a 0-10V analogue control signal and remotely control slave units like the
LCDM0-10/12-24V or the LCDM0-10/350CC or the LCDM0-10/700CC or the LCDM0-10/1050CC
Ideally suited to controlling large led loads at a distance where voltage drop maybe an issue. Either constant voltage loads or constant current loads depending on the type of led and what slave unit is used.

Code :

LCDM-MOD-0/10

Voltage Input:

12 - 24VDC

Load :

Max 10mAmp

Dimming :

0-100% 0-10V analogue

IP Rating :

IP20