Dimmer Module 8Amp Single Channel
Pulse Width Modulation

The LCDM-MOD-12/24VDC LED Dimmer module is designed to snap into most stand NZ switch plates, HPM, PDL & Clipseal. Excellent unit for matching into existing decor. The spline for the knob is a standard 6mm x T18 which allows the end user to use readily available knobs to suit their decor. It can control approxmately 20m of LS101 or 20m of LS102 or 20m of LS106 and in ultra high power approximately 5m of LS107 or 5m of LS108 or 5m LS109.
However if the distance from the dimmer to the led strip is large then we recommend using a data repeater to avoid voltage drop.
Creater runs can be easily dimmed using data repeaters like the
LCDR-6A-5/32 or the LCDR-8A-12/24

Code :

LCDM-MOD-12/24VDC

Voltage :

12 - 24VDC

Current :

8Amps Single Channel

Load :

Max 96Watts @ 12VDC or 192Watts @ 24VDC

Dimming :

0-100% Pulse width modulation dimming

IP Rating :

IP20