Wireless Data Repeater 5Amp x 3Channel
Receiver

This data repeater is ideally suited to situations where wires cant be run to control strip
Used to repeat constant voltage signal from an RGB controller or a single colour dimmer.
It can be used in large led strip runs where the loading of the controller or dimmer is too small to run all the led strip or can be used where the load is at a distance and voltage drop becomes an issue. Many can be used from a single RGB controller or dimmer to achieve large scenes.
It receives transmissions (or is controlled by) the LCDRLT-3050

Code :

LCDRLT-3053-5A

Voltage :

Constant voltage 5 to 24VDC

Current :

5Amps per channel or 15Amps total

Load :

Max 75Watts @ 5VDC or 180Watts @ 12VDC or 360Watts @ 24VDC

Mode :

Pulse width modulation (PWM) output

Size :

L175×W44×H30

IP Rating :

IP20

Frequency :

2.4Ghz

Channels :

64 channel set by DIP switch

Range :

350m under ideal conditions