Data Repeater 3Amp x 3Channel

This waterproof data repeater is used to repeat constant voltage signal from an RGB controller or a single colour dimmer. It can be used in large led strip runs where the loading of the controller or dimmer is too small to run all the led strip or can be used where the load is at a distance and voltage drop becomes an issue. Many can be used from a single RGB controller or dimmer to achieve large scenes in wet areas

Code :

LCDRLT-3063-3A

Voltage :

Constant voltage 5 to 24VDC

Current :

3Amps per channel or 9Amps total

Load :

Max 45Watts @ 5VDC or 108Watts @ 12VDC or 216Watts @ 24VDC

Mode :

Pulse width modulation (PWM)

Size :

120L x 39W x 38H

IP Rating :

IP68