PWM, Dali, 0/1-10V, potentiometer & switch dimming.
5Amp 8-48VDC Constant Voltage

The XDL_6DV1_48V5A_E is a very versatile dimming module accepting 6 different input protocols.
Installed between the power supply and the Constant Voltage LED load giving perfect 0-100% dimming.
Linear or Logarithmic dimming curve.
Small slim profile with only 0.2W standby load.
In PWM mode these units will accept and work perfectly with the output of most TASK other PWM dimmers even if they are operating at 12VDC or 24VDC.
Over load & over temp protection.
IEC61558-1, SELV, IEC 61347-2-13 & EMC compliant.

Code :

XDL-6DV1-48V5A-E

Voltage Input:

8-48VDC

Signal Input:

PWM, Dali, 0/1-10V, potentiometer & switch dim

Load :

Max 240Watt (5Amp@48VDC) Single Channel

Dimming :

0-100%

IP Rating :

IP20

Dimensions:

L153 x W23.5 x H24.5

Max Cable Run:

30m max output cable run recommended

Operating Temp:

-25°C - 40°C @ Full load

Specifications Sheet

T: (09) 820 0004
F: (09) 820 0007
E: sales@tasklighting.co.nz

Get Latest Catalogue

GET THE LATEST CATALOGUE HERE