- Led Strips
- Interior Strips
- Weatherproof Strips
- Specialty Strips
- Strip Install Guide
- LumiStrip Range
- LED Profiles & Channels
- LED Neon Flex
- Neon Flex LDNF200 Series
- LumiFlex LDNF300 SideView 120deg
- LumiFlex LDNF310 SideView 270deg
- LumiFlex LDNF320 TopView 120deg
- Led Modules
- Led Control-DIM-DMX-RGB-RGBW
- WiFi Aerials
- Led Drivers Interior
- Led Drivers Exterior
- DC Voltage Regulators
- LED Solar Lights
- Led Wall Washers
- LED Highbays
- Led Flood Lights
- LED Shop Lights
- Exterior/Garden Lights
- Apps & Downloads
These push dimming slave units below only require a momentary mechanism at the switch plate to give perfect 0-100% dimming.
They are low voltage devices working between the power and the product and give perfect 0-100% dimming.
Currently dimming constant voltage LED strips works best on the low voltage side with phase dimming of constant voltage power supplies still needing more developement to give a comparable load and dimming range.
Most good switch plate ranges have a push button (momentary mechanism) option.
Both constant voltage and constant current models available.
Multiple units synchronise their dimming.
2way, 3way, 4way, 5way or more dimming is simple.
Slave is positioned between the power supply and the load with a 2 core cable to the momentary mech in the switch plate.
Push Dimming Slave
12Amp x 1Channel
A 12Amp x 1 Channel 12/24VDC output, push dim control & 12-24VDC supplySee Full Specs... >
12Amp x 1Channel 12/24VDC
DIN rail mount, 0/1-10V analogue or push dim inputSee Full Specs... >
Push Dimming Slave
Constant current output 350/700/1050mA, push dim input & 12-48VDC supplySee Full Specs... >
New Wireless Wall Mount Slide Touch Dimmer
Latest in touch technology find out more >
New High Density LED Strip
18W/m 24VDC find out more >
RGB White Touch Controller
RGB White Touch Remote Controller find out more >
LED Highbay IP65 Nichia LEDs
TM21 & LM79 reports
300W, 240W, 200W, 150W, 120W & 100W find out more >